Tag: microwave

All the articles with the tag "microwave".

• Panasonic Microwave U30 Error Code - Causes & Fix

  31 May, 2026

  U30 means memory cook time exceeds the limit for Double or Triple Quantity mode. Reprogram the stored time to fix it.

• Panasonic Microwave U14 Error Code - Causes & Fix

  31 May, 2026

  U14 means the water tank is empty on steam-cooking Panasonic microwaves. Refill the tank, reseat it firmly, and press Stop/Reset.

• Panasonic Microwave U17 Error Code - Causes & Fix

  31 May, 2026

  U17 means an unsupported or damaged SD memory card is inserted. Remove the card, verify it's the factory-supplied type, and reinsert unlocked.

• Panasonic E01 Error Code - Causes & Fix

  31 May, 2026

  E01 means a self-diagnostic fault or invalid operation. Unplug the microwave and call Panasonic service if it appears during cooking.

• Whirlpool Microwave F04 Error Code - Causes & Fix

  31 May, 2026

  F04 means a problem with the Electronic Oven Control or its wiring. Power reset first, then inspect connections and control board.

• Whirlpool Microwave F03 Error Code - Causes & Fix

  31 May, 2026

  F03 signals a fault in the Electronic Oven Control or its wiring. Power-cycle the unit first, then inspect wiring and the control board.

• Whirlpool Microwave F02 Error - Causes & Fix

  31 May, 2026

  F02 means the keypad reported a fault to the control board. Power reset at the breaker for 1 minute clears most transient codes.

• Whirlpool Microwave F01 Error - Causes & Fix

  31 May, 2026

  F01 signals a temperature sensor or control fault in Whirlpool built-in microwaves. Most common fix: replace the control board.

• Whirlpool Microwave E63 Error Code - Causes & Fix

  31 May, 2026

  E63 means the oven sensor circuit is shorted. Most often caused by a failed sensor. Reset power first, then test sensor and wiring.

• Whirlpool Microwave E23 Error Code - Causes & Fix

  31 May, 2026

  E23 means a thermal sensor circuit fault. Most often caused by a failed sensor or loose connector. Power-cycle first, then inspect.

• Whirlpool Microwave E24 Error Code - Causes & Fix

  31 May, 2026

  E24 signals a thermal sensor or control circuit fault. Most cases need a new thermistor or harness repair to restore safe operation.

• Whirlpool Microwave E22 Error Code - Causes & Fix

  31 May, 2026

  E22 means a shorted thermal sensor circuit. Most likely fix: replace the thermal sensor after a power reset and wiring inspection.

• Whirlpool Microwave E13 Error Code - Causes & Fix

  31 May, 2026

  E13 means preheat failure on Whirlpool over-the-range microwaves. Most often the appliance control board or wiring has failed.

• Whirlpool Microwave E21 Error - Causes & Fix

  31 May, 2026

  E21 means the control board sees an open thermal sensor circuit. Most often caused by a failed sensor or loose connector.

• Whirlpool Microwave E03 Error - Causes & Fix

  31 May, 2026

  E03 means the keypad or user interface has failed or is sending bad signals to the control board. Reset power and check for stuck keys.

• GE Microwave PF Error Code - Causes & Fix

  31 May, 2026

  PF means power failure. The microwave lost incoming power. Press CLEAR, unplug for 60 seconds, then plug back in to reset the code.

• GE Microwave F6 Error Code - Causes & Fix

  31 May, 2026

  F6 on a GE microwave means a shorted temperature probe. The most likely fix is replacing the probe or repairing its wiring.

• GE Microwave F10 Error - Causes & Fix

  31 May, 2026

  F10 on a GE microwave means a shorted touch screen or touch panel. Most often fixed by power-cycling or replacing the touchscreen.

• GE Microwave F5 Error Code - Causes & Fix

  31 May, 2026

  F5 means a shorted humidity sensor in your GE microwave. Power-cycle first, then check the sensor and wiring or call a tech.

• GE Microwave F4 Error Code - Causes & Fix

  31 May, 2026

  F4 means open humidity sensor detected for over 5 seconds. Most often the humidity sensor has failed and needs replacement.

• LG Microwave DOOR Error Code - Causes & Fix

  31 May, 2026

  DOOR means the microwave doesn't detect the door is fully closed or latched. Most often caused by an obstruction or failed interlock switch.

• LG Microwave F17 Error Code - Causes & Fix

  31 May, 2026

  F17 means a temperature sensor fault in your LG microwave. Most often the sensor or its wiring has failed and requires service.

• LG Microwave F16 Error - Causes & Fix

  31 May, 2026

  F16 means a heating issue in the inverter. Most likely fix: reset power and check the inverter cooling fan or replace the inverter board.

• LG Microwave F5 Error - Causes & Fix

  31 May, 2026

  F5 means damper switch error on LG microwaves. Check for obstructions blocking the door, then call service if the code stays.