Tag: microwave
All the articles with the tag "microwave".
-
LG Microwave F11 Error Code - Causes & Fix
F11 on an LG microwave means an inverter communication error. Unplug for 1 minute and retry. If it persists, call for service.
-
LG Microwave F4 Error - Causes & Fix
F4 means a humidity sensor error on LG microwaves. The most likely fix is replacing the failed humidity sensor or repairing its wiring.
-
LG Microwave F2 Error Code - Causes & Fix
F2 means the thermistor senses temperature out of range. Most often caused by a failed sensor. LG states this error requires service.
-
LG Microwave E10 Error Code - Causes & Fix
E10 means LG detected an internal short in the control board. Power reset first, replace the control board if the code returns.
-
LG Microwave LOC Error Code - Causes & Fix
LOC means the control lock (child lock) is enabled. Press and hold STOP/CLEAR until LOC disappears to unlock the keypad and resume use.
-
Samsung Microwave TE Error - Causes & Fix
TE means touch communication error: the control board can't reach the keypad. Most likely fix: power reset or replace the membrane switch.
-
Samsung E-X2 Microwave Error - Causes & Fix
E-X2 means Additional Short Error. Power reset the microwave for 60 seconds. If it returns, a control board or keypad short needs service.
-
Samsung Microwave E-83 Error Code - Causes & Fix
E-83 means lost communication between main and sub boards. Most likely fix: reset power, check door switches, or replace control board.
-
Samsung Microwave E-X1 Error - Causes & Fix
E-X1 means 'Additional Open Error' on Samsung microwaves. Reset power for 60 seconds. If the code returns, call Samsung service.
-
Samsung Microwave E-81 Error - Causes & Fix
E-81 means Communication Open Error. A control-board or wiring fault interrupted communication. Power reset first, then call service.
-
Samsung Microwave E-63 Error - Causes & Fix
E-63 means T1 Max Time Humidity Sensor Error. Most often the humidity sensor has failed. Reset power for 60 seconds first.
-
Samsung Microwave E-62 Error - Causes & Fix
E-62 means a short humidity sensor error. Power-cycle first. If the code returns, inspect the sensor, wiring, and control board.
-
Samsung Microwave E-54 Error - Causes & Fix
E-54 means 'Zero Error' on Samsung microwaves. Unplug for 60 seconds and restore power. If it returns, call Samsung service.
-
Samsung Microwave E-61 Error - Causes & Fix
E-61 means an open humidity sensor circuit. The most likely fix is reconnecting or replacing the humidity sensor or its wiring harness.
-
Samsung E-53 Error Code - Causes & Fix
E-53 is a Read/Write Error on Samsung microwaves, pointing to control board memory failure. Most likely fix: reset power or replace the board.
-
Samsung Microwave E-34 Error - Causes & Fix
E-34 means Over Weight Error: the turntable load exceeds the model's limit for weight-sensing mode. Reset power for 60 seconds first.
-
Samsung Microwave E-04 Error - Causes & Fix
E-04 means Cooking Time Setting Over Error in convection mode. Reset power for 60 seconds and re-enter a valid time to clear it.
-
Samsung C-A2 Error Code - Causes & Fix
C-A2 on Samsung combination microwave/wall ovens means cooling fan failure. Most common fix: replace the blower fan or repair its burned connector.
-
Samsung Microwave E-01 Error - Causes & Fix
E-01 means an open circuit is detected. Unplug the microwave for 60 seconds, then restore power to clear the code and test again.
-
Samsung C-70 Microwave Error - Causes & Fix
C-70 means a steam sensor fault. Most common fix: unplug 60 seconds to reset, dry out any moisture, check sensor wiring.
-
Samsung E-52 Error Code - Causes & Fix
E-52 means EEPROM short error on the main control board. Reset power for 60 seconds. If it returns, replace the control board.
-
Samsung Microwave E-51 Error - Causes & Fix
E-51 means Sense Failure on Samsung microwaves. Usually caused by a stuck key, dirty ribbon cable, or failed control board. Fix with reset or keypad replacement.
-
Samsung E-47 Error Code - Causes & Fix
E-47 means Door Open Error. The microwave thinks the door is ajar. Most often a faulty latch or interlock switch is the cause.
-
Samsung Microwave E-46 Error - Causes & Fix
E-46 means Primary Open Error: an open circuit in the temperature sensor. Reset power first, then check the sensor and wiring.