Tag: washer

All the articles with the tag "washer".

• Electrolux Washer EF2 Error Code - Causes & Fix

  30 May, 2026

  EF2 means excess foam or suds in the drum. Most often caused by too much detergent or a clogged drain filter blocking water removal.

• Electrolux EF5 Error Code - Causes & Fix

  30 May, 2026

  EF5 means an out-of-balance load during spin. Redistribute laundry evenly, check the machine is level, and inspect the drain pump.

• Electrolux Washer EF1 Error Code - Causes & Fix

  30 May, 2026

  EF1 means your Electrolux washer can't drain properly. Clean the drain filter first, then check the hose for kinks or blockages.

• Electrolux Washer EC1 Error Code - Causes & Fix

  30 May, 2026

  EC1 means your Electrolux washer sees a bad flow-meter signal during fill. Check inlet screens and hoses, then test the inlet valve.

• Electrolux E82 Error Code - Causes & Fix

  30 May, 2026

  E82 means selector position fault or control board error. Most common fix: reset selector to zero, power-cycle, or replace main PCB.

• Electrolux Washer E83 Error Code - Causes & Fix

  30 May, 2026

  E83 on an Electrolux washer signals a control board electronic fault. Try a hard power reset first, then replace the board if it returns.

• Electrolux Washer E62 Error Code - Causes & Fix

  30 May, 2026

  E62 means water overheating during wash. Most often a bad heater element or temperature sensor. Check cold supply first, then test NTC.

• Electrolux Washer E60 Error Code - Causes & Fix

  30 May, 2026

  E60 means your Electrolux washer isn't heating water. Most often the heating element or temperature sensor has failed. Check and replace.

• Electrolux Washer E61 Error Code - Causes & Fix

  30 May, 2026

  E61 means a heating system fault in your Electrolux washer. Most often caused by a failed control board, loose wiring, or bad heater element.

• Electrolux Washer E52 Error - Causes & Fix

  30 May, 2026

  E52 means the motor tachometer or speed sensor has failed. The washer can't detect motor rotation. Replace the motor or control board.

• Electrolux E51 Error Code - Causes & Fix

  30 May, 2026

  E51 means a motor triac short circuit on the main control board. Most common fix: replace the electronic control board or the motor.

• Electrolux Washer E44 Error Code - Causes & Fix

  30 May, 2026

  E44 means door lock failure on Electrolux washers. Most common fix: replace the door lock assembly after checking door closure.

• Electrolux Washer E45 Error Code - Causes & Fix

  30 May, 2026

  E45 means a door lock or door interlock fault. The most common fix is replacing the door lock assembly or ensuring the door fully closes.

• Electrolux Washer E36 Error Code - Causes & Fix

  30 May, 2026

  E36 means the pressure-switch sensing circuit is faulty. Most likely cause is a leak or kink in the pressure hose or faulty switch.

• Electrolux E35 Error Code - Causes & Fix

  30 May, 2026

  E35 means the pressure sensor detected overfill. Check installation, inlet valve, pressure hose, and drain for blockage or siphoning.

• Electrolux Washer E23 Error Code - Causes & Fix

  30 May, 2026

  E23 means a drain pump drive-circuit fault. Most common fix: replace the drain pump or inspect wiring and control board connections.

• Electrolux Washer E21 Error Code - Causes & Fix

  30 May, 2026

  E21 means your Electrolux washer is draining too slowly. Check for a kinked drain hose or clogged pump filter first.

• Electrolux Washer E13 Error Code - Causes & Fix

  30 May, 2026

  E13 means the washer detected an unexpected drop in water level. Check for leaks, loose hoses, and drain-hose siphoning first.

• Electrolux Washer E12 Error Code - Causes & Fix

  30 May, 2026

  E12 means your Electrolux washer isn't filling with water during rinse. Check taps are open, hoses aren't kinked, and inlet valve works.

• Electrolux Washer E11 Error Code - Causes & Fix

  30 May, 2026

  E11 means the washer isn't filling with water in time. Check water supply valves are open, hoses aren't kinked, and inlet valve works.

• Frigidaire Washer E24 Error Code - Causes & Fix

  30 May, 2026

  E24 means the drain pump relay on the control board has failed. The most common fix is replacing the main control board.

• Kenmore F5 E1 Error Code - Causes & Fix

  30 May, 2026

  F5 E1 means the lid lock or latch has failed or cannot engage. Usually fixed by replacing the lid lock assembly or realigning the strike.

• Maytag Washer LOC Error Code - Causes & Fix

  30 May, 2026

  LOC or LC means Control Lock is on. Press and hold the Control Lock button for 3 seconds to unlock and resume normal operation.

• Maytag F9 E1 Error Code - Causes & Fix

  30 May, 2026

  F9 E1 means long drain time on your Maytag washer. Most often a kinked drain hose or clogged pump filter is the culprit.