Tag: washer

All the articles with the tag "washer".

• Maytag Washer F26 Error Code - Causes & Fix

  30 May, 2026

  F26 means the washer can't verify the lid or door is closed. The most common fix is cleaning the latch or replacing the lid switch.

• Maytag Washer D16 Error Code - Causes & Fix

  30 May, 2026

  D16 means the control board isn't receiving communication from the debit card reader. Power-cycle first, then inspect reader connections.

• Maytag Washer D4 Error Code - Causes & Fix

  30 May, 2026

  D4 means a lid switch circuit failure (top-load) or door sense error (front-load). Check the lid or door switch and wiring first.

• LG Washer dHE Error Code - Causes & Fix

  30 May, 2026

  dHE means temporary dry function error on LG combo units. Try a 10-second power reset first. If it returns, service needed.

• Samsung Washer dE1 Error Code - Causes & Fix

  30 May, 2026

  dE1 means the door is not fully closed or locked. Check for laundry trapped in the seal, push the door shut firmly, then restart.

• Whirlpool LF Error Code - Causes & Fix

  30 May, 2026

  LF means your Whirlpool washer isn't filling with water fast enough. Usually caused by low water pressure or clogged inlet screens.

• Samsung bE Error Code - Causes & Fix

  30 May, 2026

  bE means a control-panel button is stuck or jammed. Press each button firmly to release it, then power-cycle the washer.

• Whirlpool Washer F3E2 Error Code - Causes & Fix

  30 May, 2026

  F3E2 on a Whirlpool washer signals an inlet water temperature sensor fault. The most common fix is replacing the thermistor.

• Whirlpool F0E1 Error Code - Causes & Fix

  30 May, 2026

  F0E1 means the Clean Washer cycle started with laundry inside. Remove all items from the tub and restart the cycle empty to clear.

• Electrolux E10 Error Code - Causes & Fix

  30 May, 2026

  E10 means your Electrolux washer cannot fill with water in time. Most often the inlet tap is closed or the inlet filter is clogged.

• Kenmore Washer F9 E1 Error Code - Causes & Fix

  30 May, 2026

  F9 E1 means long drain time or no drain. Most often caused by a kinked drain hose, clogged pump filter, or a failed drain pump.

• Kenmore Washer F1 E1 Error Code - Causes & Fix

  30 May, 2026

  F1 E1 on Kenmore washers means control board fault. Power-cycle first: unplug 5 minutes. If code returns, replace main control board.

• Kenmore Washer F0 E4 Error Code - Causes & Fix

  30 May, 2026

  F0 E4 means your Kenmore washer detects excessively hot water. Most often, hot and cold fill hoses are reversed at the back or wall.

• Kenmore Washer F0 E2 Error - Causes & Fix

  30 May, 2026

  F0 E2 means excessive suds detected in your Kenmore washer. Switch to HE detergent and use less per load to fix it right away.

• Frigidaire Washer EF2 Error Code - Causes & Fix

  30 May, 2026

  EF2 means too many suds detected in your Frigidaire washer. Most common fix: switch to HE detergent and use less of it.

• Frigidaire Washer EB1 Error Code - Causes & Fix

  30 May, 2026

  EB1 means incoming power frequency is out of limits. Most often caused by a generator or unstable supply, not a washer fault.

• Frigidaire E95 Error Code - Causes & Fix

  30 May, 2026

  E95 means control boards can't communicate. Most likely fix: power-reset the washer and reseat all control-board connectors.

• Frigidaire E47 Error Code - Causes & Fix

  30 May, 2026

  E47 means door-lock circuit fault during spin. Usually a failed door lock assembly. Check lock resistance (1,100–1,700 Ω) and replace if open.

• Frigidaire Washer E46 Error Code - Causes & Fix

  30 May, 2026

  E46 means a board communication fault in Frigidaire front-load washers. The most likely fix is replacing the main control board.

• Frigidaire Washer E45 Error Code - Causes & Fix

  30 May, 2026

  E45 means control board communication failure. Most often fixed by replacing the main control board after checking wiring and connectors.

• Frigidaire E44 Error Code - Causes & Fix

  30 May, 2026

  E44 means a door-lock circuit fault. Most often the door lock assembly has failed. Check the lock, wiring, and control board.

• Frigidaire Washer E23 Error Code - Causes & Fix

  30 May, 2026

  E23 means the drain pump relay on the control board has failed. Most often you'll replace the main electronic control board.

• Frigidaire E21 Error Code - Causes & Fix

  30 May, 2026

  E21 means slow drain or drain fault. Most often caused by a kinked hose or clogged pump. Check hose routing and clear debris from pump.

• Frigidaire E14 Error Code - Causes & Fix

  30 May, 2026

  E14 means the washer detects the dispenser drawer is open or not seated. Most often fixed by cleaning residue and reseating the drawer.