Posts

All the articles I've posted.

• Bosch Washer F42 Error Code - Causes & Fix

  9 Jun, 2026

  F42 means motor overspeed detected. Most often a faulty tacho sensor or worn carbon brushes cause erratic motor feedback.

• Bosch F27 Error Code - Causes & Fix

  9 Jun, 2026

  F27 means a faulty pressure sensor or pressure-sensing circuit. The most common fix is replacing the pressure switch or clearing the tube.

• Bosch Washer E20 Error Code - Causes & Fix

  9 Jun, 2026

  E20 on a Bosch washer signals unexpected heating. Turn the washer off, wait 30 seconds, and turn it back on to reset the fault.

• Amana Dryer Won't Tumble - Causes & Fix

  9 Jun, 2026

  A broken drive belt is the most common cause when an Amana dryer won't tumble. Check if the drum spins freely by hand to confirm.

• Amana Dryer Won't Start - Causes & Fix

  9 Jun, 2026

  Most often a tripped breaker, control lock engaged, or bad door switch. Check power and settings first, then test the door latch and thermal fuse.

• Frigidaire Dryer Squeaking - Causes & Fix

  9 Jun, 2026

  Usually a worn rear drum bearing or support. Replace the bearing kit, idler pulley, belt, and drum rollers to stop the squeak.

• LG Dryer Gets Too Hot - Causes & Fix

  9 Jun, 2026

  Blocked exhaust duct or clogged lint screen restricts airflow, causing overheating. Clean the vent system and inspect the thermistor.

• Yaskawa GA800 A.144 Fault - Causes & Fix

  9 Jun, 2026

  A.144 is not a standard GA800 fault code. Verify the exact display-may be A.14 or misread. Check motor wiring, encoder connections, and option cards.

• Yaskawa GA800 A.137 Fault - Causes & Fix

  9 Jun, 2026

  A.137 is not a standard GA800 code in published manuals. Check for misread display or machine-specific parameter fault; reset and verify wiring.

• Yaskawa GA800 A.121 Fault - Causes & Fix

  9 Jun, 2026

  A.121 is not a documented GA800 fault code. Verify the exact display and model. Most likely a misread alarm or wrong drive series.

• Bosch Dishwasher E06 Error - Causes & Fix

  9 Jun, 2026

  E06 on a Bosch dishwasher means a door sensor or latch circuit fault. Most often the door is not closing fully or the sensor is faulty.

• Bosch Dishwasher E05 Error Code - Causes & Fix

  9 Jun, 2026

  E05 means a wash arm diverter circuit fault in the main control board. Most common fix: power reset at the breaker for 30 seconds.

• LG Dryer Burning Smell - Causes & Fix

  8 Jun, 2026

  Lint buildup in the filter housing or vent system is the most common cause. Clean the lint filter, housing, and vent hose fully.

• Speed Queen Washer Stuck on One Cycle - Causes & Fix

  8 Jun, 2026

  Usually caused by a water fill problem, drain blockage, or lid lock fault preventing the control from advancing to the next step.

• Speed Queen Washer Shaking and Loud - Causes & Fix

  8 Jun, 2026

  An unbalanced load is the most common cause. Redistribute heavy items evenly, check that the washer is level, and remove shipping bolts if new.

• Speed Queen Washer Door Won't Unlock - Causes & Fix

  8 Jun, 2026

  Most often the door lock assembly has failed or the washer still senses water in the tub. Reset power, verify drainage, and inspect the lock.

• Speed Queen Washer Won't Start - Causes & Fix

  8 Jun, 2026

  Usually caused by a lid not registering closed or no incoming power. Check that the lid is fully shut, the power cord is plugged in, and hold Start for two seconds.

• Amana Washer Won't Turn On - Causes & Fix

  8 Jun, 2026

  Usually a tripped breaker, unplugged cord, or Control Lock enabled. Check power, unlock the console, and verify the lid is closed.

• Amana Washer Leaking Water - Causes & Fix

  8 Jun, 2026

  Usually a worn door seal, loose inlet hose, or failed pump seal. Check hoses first, inspect the door gasket, then test the pump underneath.

• Amana Washer Won't Drain - Causes & Fix

  8 Jun, 2026

  Usually a kinked or blocked drain hose. Check for kinks, clear any debris from the pump area, and reset the machine to restore draining.

• Frigidaire F26 Error Code - Causes & Fix

  8 Jun, 2026

  F26 on Frigidaire ranges means communication error between control board and keypad. Most often fixed by reseating ribbon cable.

• Maytag LdL Error Code - Causes & Fix

  8 Jun, 2026

  LdL means the lid lock will not lock or has failed. Most often an item under the lid or detergent buildup blocks the lock mechanism.

• Maytag Washer d9 Error Code - Causes & Fix

  8 Jun, 2026

  d9 means low line voltage detected. Check your outlet voltage first, then inspect the power cord and plug for loose connections.

• Maytag Oven F1 Error Code - Causes & Fix

  8 Jun, 2026

  F1 means the control lost the oven temperature sensor signal. Most often a failed sensor. Reset power, test sensor, or replace it.