Posts

All the articles I've posted.

• Yaskawa GA800 A.128 Fault - Causes & Fix

  9 Jun, 2026

  A.128 is not a verified GA800 fault code. Check your keypad display carefully and consult your manual for the exact alarm. Wiring faults are common.

• Yaskawa GA800 A.127 Fault - Causes & Fix

  9 Jun, 2026

  A.127 is not a standard GA800 fault format. Check the keypad for the exact alarm text and consult the manual's fault table before replacing parts.

• Yaskawa GA800 VFD A.126 Fault - Causes & Fix

  9 Jun, 2026

  A.126 is not a standard GA800 code. Verify the exact display, reseat option cards, check wiring, and consult your manual or Yaskawa support.

• Yaskawa GA800 A.125 Fault - Causes & Fix

  9 Jun, 2026

  A.125 is not a confirmed GA800 fault code. Verify the display-most GA800 alarms use letters like oC or ov. Check your manual for the exact code.

• Yaskawa GA800 A.124 Fault - Causes & Fix

  9 Jun, 2026

  A.124 is not a confirmed Yaskawa GA800 factory code. Verify the exact alarm on the keypad and check the drive's fault history before troubleshooting.

• Yaskawa GA800 A.121 Fault - Causes & Fix

  9 Jun, 2026

  A.121 is not a documented GA800 fault code. Verify the exact display and model. Most likely a misread alarm or wrong drive series.

• Bosch Dishwasher E13 Error - Causes & Fix

  9 Jun, 2026

  E13 means water temperature above 75°C (167°F). Most often a faulty temperature sensor or stuck heater relay. Check supply temp first.

• Bosch E09 Error Code - Causes & Fix

  9 Jun, 2026

  E09 on a Bosch dishwasher means the heating element is defective. The most common fix is replacing the heater-pump assembly.

• Bosch Dishwasher E08 Error Code - Causes & Fix

  9 Jun, 2026

  E08 means loss of water during the wash cycle. Most often caused by a kinked inlet hose, clogged filter, or blocked inlet screen.

• Bosch E07 Error Code - Causes & Fix

  9 Jun, 2026

  E07 on Bosch dishwashers signals a drying-system fault, usually a blocked or failed CrystalDry/Zeolite fan. Clean debris or replace the fan.

• Bosch Dishwasher E06 Error - Causes & Fix

  9 Jun, 2026

  E06 on a Bosch dishwasher means a door sensor or latch circuit fault. Most often the door is not closing fully or the sensor is faulty.

• Bosch Dishwasher E05 Error Code - Causes & Fix

  9 Jun, 2026

  E05 means a wash arm diverter circuit fault in the main control board. Most common fix: power reset at the breaker for 30 seconds.

• Bosch Dishwasher E04 Error - Causes & Fix

  9 Jun, 2026

  E04 usually means a water flow or circulation fault. The most common fix: clean clogged spray arms, nozzles, and filters to restore flow.

• Bosch Dishwasher E02 Error - Causes & Fix

  9 Jun, 2026

  E02 means a heating-circuit fault. The most common cause is a failed heating element. Check the element, thermistor, and wiring first.

• Bosch Dishwasher E01 Error Code - Causes & Fix

  9 Jun, 2026

  E01 means a heat pump motor circuit fault at the main control board. Most often the main control board itself has failed.

• Frigidaire Washer EF2 Error Code - Causes & Fix

  9 Jun, 2026

  EF2 means excessive suds or too much detergent. The most common fix is to use less detergent and switch to HE low-sudsing soap.

• Frigidaire E95 Error Code - Causes & Fix

  9 Jun, 2026

  E95 means a communication error between control boards on Frigidaire front-load washers. Most often caused by a loose wire connector.

• Frigidaire Washer E45 Error Code - Causes & Fix

  9 Jun, 2026

  E45 means a door-lock control circuit fault. Most often the door lock assembly or its PTC has failed. Replace the lock or control board.

• Frigidaire Washer E4 Error Code - Causes & Fix

  9 Jun, 2026

  E4 on Frigidaire top-load washers means out of balance during spin. Most often caused by uneven load or washer not sitting level.

• Frigidaire Washer E24 Error Code - Causes & Fix

  9 Jun, 2026

  E24 signals a control-side drain fault. The main control board's relay or triac for the drain pump has failed in most cases.

• Frigidaire Washer E23 Error Code - Causes & Fix

  9 Jun, 2026

  E23 signals a drain pump relay fault on the main control board. Most often the board relay has failed, though the pump or wiring may be bad.

• Frigidaire Washer E13 Error - Causes & Fix

  9 Jun, 2026

  E13 means water leak detected. Most common cause: loose fill or drain hose connection. Check all hose fittings and door boot first.

• Frigidaire Oven F41 Error Code - Causes & Fix

  9 Jun, 2026

  F41 means cooktop lockout is active or stuck. Most often fixed by resetting power for 30 seconds or holding OFF for 6 seconds to clear.

• Frigidaire Oven F12 Error Code - Causes & Fix

  9 Jun, 2026

  F12 on Frigidaire electric ranges means a micro-identification fault between the control panel and main board. Reset power first.