Posts

All the articles I've posted.

• Bosch E24 Error Code - Causes & Fix

  9 Jun, 2026

  E24 means your Bosch dishwasher is not draining due to a blockage. Check and clean the drain filter at the tub bottom first.

• Bosch E22 Error Code - Causes & Fix

  9 Jun, 2026

  E22 on a Bosch dishwasher means the filter is blocked or clogged. Clean the filter assembly at the bottom of the tub and reseat it firmly.

• Bosch Dishwasher E18 Error Code - Causes & Fix

  9 Jun, 2026

  E18 means water flow into the dishwasher is too low. Most often caused by a kinked inlet hose or blocked filter in the supply line.

• Bosch Dishwasher E15 Error Code - Causes & Fix

  9 Jun, 2026

  E15 means water in the base pan triggered the leak-protection switch. Most likely fix: remove water from base and repair the leak source.

• Bosch Dishwasher E14 Error Code - Causes & Fix

  9 Jun, 2026

  E14 means flow meter failure or water fill problem. Most often caused by a faulty flow sensor in the inlet path. Check water supply first.

• Frigidaire Washer E46 Error Code - Causes & Fix

  9 Jun, 2026

  E46 means a controller problem on your Frigidaire washer. The most common fix is replacing the main electronic control board.

• Frigidaire Dryer AL-14 Error Code - Causes & Fix

  9 Jun, 2026

  AL-14 is not a standard Frigidaire code. It likely signals a model-specific alarm. Most common fix: hard reset by unplugging 5 minutes.

• Maytag Oven F8 Error Code - Causes & Fix

  9 Jun, 2026

  F8 E0 means cooling fan speed too low. Check for airflow blockage and inspect the cooling fan motor and wiring for damage or failure.

• Yaskawa A1000 CPF02 - Causes & Fix

  9 Jun, 2026

  CPF02 is an A/D conversion control-circuit error inside the drive. Most common fix: power-cycle, then replace the control board.

• Yaskawa A1000 CPF01 - Causes & Fix

  9 Jun, 2026

  CPF01 signals a control circuit error in the A1000 drive. Most often the operator connector is loose or the control board failed.

• Yaskawa A1000 CPF00 - Causes & Fix

  9 Jun, 2026

  CPF00 means a control circuit hardware fault in the drive. Most often caused by a failed control board. Cycle power, check connections, replace board if needed.

• Yaskawa GA800 A.148 - Causes & Fix

  9 Jun, 2026

  A.148 is not a fault code on the GA800 keypad. It is a parameter or monitor number. Check the main display for the real fault code.

• Yaskawa GA800 A.146 Fault - Causes & Fix

  9 Jun, 2026

  A.146 on a Yaskawa GA800 VFD is not defined in available documentation. Check your drive's manual alarm table and fault history first.

• Yaskawa GA800 A.144 Fault - Causes & Fix

  9 Jun, 2026

  A.144 is not a standard GA800 fault code. Verify the exact display-may be A.14 or misread. Check motor wiring, encoder connections, and option cards.

• Yaskawa GA800 A.143 Fault - Causes & Fix

  9 Jun, 2026

  A.143 is not a standard GA800 fault code. Confirm the exact display text and check your fault history menu before diagnosing further.

• Yaskawa GA800 A.142 - Causes & Fix

  9 Jun, 2026

  A.142 is not a verified GA800 fault code. Confirm the exact keypad text and check fault history, wiring, and motor connections first.

• Yaskawa GA800 A.138 Fault - Causes & Fix

  9 Jun, 2026

  A.138 is not documented in standard GA800 alarm lists. Verify the exact code on your keypad and check your drive's manual alarm table.

• Yaskawa GA800 A.137 Fault - Causes & Fix

  9 Jun, 2026

  A.137 is not a standard GA800 code in published manuals. Check for misread display or machine-specific parameter fault; reset and verify wiring.

• Yaskawa GA800 A.134 Fault - Causes & Fix

  9 Jun, 2026

  A.134 is not documented in standard GA800 manuals. Check the drive's alarm history for the exact fault name, then reseat option cards.

• Yaskawa GA800 A.133 Fault - Causes & Fix

  9 Jun, 2026

  A.133 is not documented in Yaskawa GA800 manuals. Verify the exact code on the keypad, check wiring and connections, and consult the manual.

• Yaskawa GA800 A.132 Fault - Causes & Fix

  9 Jun, 2026

  A.132 is not a standard GA800 code. Verify the exact display-it may be a keypad error or option-card status. Check manual for correct format.

• Yaskawa GA800 VFD A.131 Fault - Causes & Fix

  9 Jun, 2026

  A.131 is not a confirmed GA800 fault code. Likely a parameter number or misread display. Verify exact code on keypad and consult manual.

• Yaskawa GA800 A.130 Fault - Causes & Fix

  9 Jun, 2026

  A.130 is not documented in standard GA800 fault tables. Check your drive's manual for the exact code definition before troubleshooting.

• Yaskawa GA800 A.129 Fault - Causes & Fix

  9 Jun, 2026

  A.129 is not a documented GA800 fault code. Verify the exact display text on the keypad and check your manual's alarm table for the correct code.