Posts

All the articles I've posted.

• Amana Dishwasher F8E2 Error Code - Causes & Fix

  12 Jun, 2026

  F8E2 means a drain pump electrical fault. The control detects an abnormal circuit condition. Most often a failed drain pump motor.

• Amana Dishwasher F2E2 Error Code - Causes & Fix

  12 Jun, 2026

  F2E2 means the control panel and main board aren't communicating. Power reset for 30 seconds fixes most cases or check wiring connections.

• Electrolux Dryer EA3 Error Code - Causes & Fix

  12 Jun, 2026

  EA3 means incoming voltage is below 90 VAC. Usually caused by a weak power supply or loose cord connection, not a dryer fault.

• Electrolux Dryer E92 Error - Causes & Fix

  12 Jun, 2026

  E92 on an Electrolux dryer means a configuration mismatch between the UI and main control board. Reset first, then verify correct parts.

• Kenmore Dryer F78 Error Code - Causes & Fix

  12 Jun, 2026

  F78 means restricted communication between the main control board and keypad. Most likely fix: reseat the wiring harness connectors.

• Kenmore Microwave F6 Error - Causes & Fix

  12 Jun, 2026

  F6 means relay/control communication fault. Most often a failed relay control board or damaged wiring; reset power first.

• Kenmore F28 Error Code - Causes & Fix

  12 Jun, 2026

  F28 means lost communication between main control and motor control. Reseat all harness connectors first, fix most cases.

• Kenmore Dishwasher F9E2 Error - Causes & Fix

  12 Jun, 2026

  F9E2 on Kenmore dishwashers means diverter drive blocked. The most common fix is replacing the main control board with failed diverter relay.

• Kenmore Dishwasher F9E1 Error - Causes & Fix

  12 Jun, 2026

  F9E1 means drain timeout or diverter-disk detection failure (varies by model). Check the drain hose for kinks and the disposer knockout first.

• KitchenAid Oven F6 E9 Error - Causes & Fix

  12 Jun, 2026

  F6 E9 means loss of communication to the lower oven appliance manager. Most often caused by loose wiring or a failed control board.

• KitchenAid Oven F6 E3 Error - Causes & Fix

  12 Jun, 2026

  F6 E3 means a control communication or power-supply fault. Power-cycle the breaker first; if it returns, replace the control board.

• KitchenAid F8E4 Error Code - Causes & Fix

  12 Jun, 2026

  F8E4 means water in the base triggered the leak float. Most often a loose water-supply fitting or suds overflow. Dry tray, check connections.

• KitchenAid Dishwasher F7E1 Error - Causes & Fix

  12 Jun, 2026

  F7E1 means heating circuit fault. Most often caused by damaged heater wiring or a failed heating element. Check harness and test element.

• KitchenAid Dishwasher F6E4 Error - Causes & Fix

  12 Jun, 2026

  F6E4 means an overfill or float-switch fault. Most often the dishwasher is not level, triggering the float. Level the unit first.

• KitchenAid F2E2 Error Code - Causes & Fix

  12 Jun, 2026

  F2E2 signals a communication fault between the keypad and main control. Power-cycle for 1 minute first; often clears the fault.

• Bosch Washer E17 Error Code - Causes & Fix

  12 Jun, 2026

  E17 means restricted water supply. Most often a closed tap, kinked inlet hose, or clogged screen. Check tap, hose, and filter first.

• Bosch Oven F154 Error Code - Causes & Fix

  12 Jun, 2026

  F154 is not a documented Bosch oven code. You likely saw F41-F43 (door latch fault). Check door for obstructions and clean latch tracks first.

• Bosch E305 Error Code - Causes & Fix

  12 Jun, 2026

  E305 signals a lost communication link between the TCM and user interface. The most common fix is reseating ribbon cables.

• Frigidaire E14 Error Code - Causes & Fix

  12 Jun, 2026

  E14 means the dispenser drawer is not fully closed or its sensor failed. Most common fix: clean residue from drawer and cavity, reseat firmly.

• Frigidaire Washer EB1 Error Code - Causes & Fix

  12 Jun, 2026

  EB1 means incoming power frequency is out of limits. Most often the household supply is unstable or the control board has failed.

• Bradford White Water Heater Rusty Water - Causes & Fix

  11 Jun, 2026

  Rusty water usually means a spent anode rod or corroded tank. Replace the anode rod if depleted, or the tank if internal corrosion is confirmed.

• Bradford White Water Heater Popping Noise - Causes & Fix

  11 Jun, 2026

  Sediment buildup at tank bottom traps steam bubbles that collapse and create popping sounds. Flush the tank to remove mineral deposits.

• Bradford White Water Heater Pilot Won't Stay Lit - Causes & Fix

  11 Jun, 2026

  Failed pilot assembly is the most common cause. Bradford White directs replacing the pilot assembly first, then the gas control if needed.

• Bradford White Water Heater No Ignition - Causes & Fix

  11 Jun, 2026

  Usually a dead pilot flame, no gas supply, or failed igniter/flame-sense assembly. Check gas on, pilot lit, and flame-sense wire continuity.