Tag: maytag

All the articles with the tag "maytag".

• Maytag Oven A6 Error Code - Causes & Fix

  31 May, 2026

  A6 or SAb on your Maytag oven means Sabbath mode is active. Exit the mode by holding the clock or cancel key for several seconds.

• Maytag Oven AB Error Code - Causes & Fix

  31 May, 2026

  AB (SAb) on a Maytag oven means Sabbath mode is active, not a fault. Exit by pressing and holding Clock for 3+ seconds.

• Maytag Oven CAL Error Code - Causes & Fix

  31 May, 2026

  CAL on a Maytag oven means the calibration feature is active, not a fault. Exit calibration mode or adjust the temperature offset.

• Maytag Oven Lock Error Code - Causes & Fix

  31 May, 2026

  Lock or LOC means Control Lock is on; hold START/ENTER 5 seconds to unlock. F9-1 to F9-6 codes signal a door latch fault.

• Maytag Oven SAB Error Code - Causes & Fix

  31 May, 2026

  SAB on your Maytag oven means Sabbath Mode is active, not a failure. Exit it by holding the Clock button for 3 seconds on most models.

• Maytag Oven LOC Error Code - Causes & Fix

  31 May, 2026

  LOC means Control Lock is active, not a failure. Press and hold START/ENTER for 5 seconds to unlock the keypad and clear the message.

• Maytag Oven F8 Error Code - Causes & Fix

  31 May, 2026

  F8 on a Maytag oven means an analog/digital board fault or meat probe issue. Most often fixed by replacing the control board (ERC).

• Maytag Oven F7 Error Code - Causes & Fix

  31 May, 2026

  F7 means a stuck or shorted keypad button or an electronic control fault. Most often fixed by replacing the touchpad or control board.

• Maytag Oven F4 Error Code - Causes & Fix

  31 May, 2026

  F4 signals a temperature sensor circuit fault. Most often the oven sensor has shorted. Reset power first, then check the sensor.

• Maytag Oven F3 Error Code - Causes & Fix

  31 May, 2026

  F3 on a Maytag oven means a temperature sensor circuit fault. The sensor probe is the most common fix, followed by wiring or the control board.

• Maytag Oven F2 Error Code - Causes & Fix

  31 May, 2026

  F2 means over-temperature condition or sensor fault. F2 E0 points to keypad or control wiring. Most common fix: replace temperature sensor.

• Maytag Oven F1 Error Code - Causes & Fix

  31 May, 2026

  F1 signals a fault in the oven temperature sensor or control circuit. Most often fixed by replacing the temperature sensor or checking wiring.

• Maytag Oven F0 Error Code - Causes & Fix

  31 May, 2026

  F0 means the control can't identify the fault, usually a stuck keypad. Reset power for 1 minute. If it returns, replace the touchpad.

• Maytag Refrigerator PO Error Code - Causes & Fix

  31 May, 2026

  PO means Power Outage: the freezer warmed to 18°F or higher during a power loss. Press MEASURED FILL under Confirm to clear the alert.

• Maytag Dishwasher F10E5 Error Code - Causes & Fix

  31 May, 2026

  F10E5 means the cycle ended early and drained. Press Cancel twice and restart. If it returns, check the door latch and control wiring.

• Maytag Dishwasher F2E2 Error Code - Causes & Fix

  31 May, 2026

  F2E2 means lost communication between the control panel and main board. Most common fix: reseat connectors or replace the UI control.

• Maytag Dishwasher E4 Error Code - Causes & Fix

  31 May, 2026

  E4 (F8E4) means water in the drip tray triggered the float switch. Most common fix: dry the base pan and check supply connections.

• Maytag F3E5 Error Code - Causes & Fix

  31 May, 2026

  F3E5 means Mini Dispenser fault on Maytag top-load washers (not dryers). Most likely fix: add detergent manually and reset power for 5 min.

• Maytag Dishwasher H2O Error Code - Causes & Fix

  30 May, 2026

  H2O means insufficient water entering during fill. Check the shutoff valve is fully open, then inspect the inlet hose for kinks.

• Maytag Dishwasher FAE5 Error Code - Causes & Fix

  30 May, 2026

  FAE5 means the cycle ended and the dishwasher drained. Press Cancel twice and start a new cycle. If it repeats, diagnose fill or flood.

• Maytag F9E2 Error Code - Causes & Fix

  30 May, 2026

  F9E2 means a drain-path problem. Check for a kinked drain hose or forgotten garbage disposer knockout plug first.

• Maytag Dishwasher F9E1 Error - Causes & Fix

  30 May, 2026

  F9E1 means your Maytag dishwasher can't drain. Most often a clogged filter, kinked hose, or jammed pump is blocking water flow.

• Maytag Dishwasher F8E5 Error - Causes & Fix

  30 May, 2026

  F8E5 means your Maytag dishwasher detected overfill or the fill valve is stuck open. Turn off the water supply, then replace the valve.

• Maytag Dishwasher F8E4 Error Code - Causes & Fix

  30 May, 2026

  F8E4 means a water supply or inlet fault. Check the supply connection, rubber washer, coupling tightness, and float switch first.