Tag: ge

All the articles with the tag "ge".

• GE Microwave F10 Error - Causes & Fix

  31 May, 2026

  F10 on a GE microwave means a shorted touch screen or touch panel. Most often fixed by power-cycling or replacing the touchscreen.

• GE Microwave F5 Error Code - Causes & Fix

  31 May, 2026

  F5 means a shorted humidity sensor in your GE microwave. Power-cycle first, then check the sensor and wiring or call a tech.

• GE Microwave F4 Error Code - Causes & Fix

  31 May, 2026

  F4 means open humidity sensor detected for over 5 seconds. Most often the humidity sensor has failed and needs replacement.

• GE Range F350 Error Code - Causes & Fix

  31 May, 2026

  F350 means the upper cooling fan circuit has failed or the fan blower wheel isn't spinning. Check for obstructions and test the motor.

• GE Range F5 Error Code - Causes & Fix

  31 May, 2026

  F5 on a GE range means a control-circuit failure in the main electronic oven control. Most often the EOC board itself needs replacement.

• GE Oven F350 Error Code - Causes & Fix

  31 May, 2026

  F350 means the upper cooling fan isn't spinning correctly. Check for obstructions first, then replace the blower motor if needed.

• GE Range FC Error Code - Causes & Fix

  31 May, 2026

  FC means the control detects a faulty door lock circuit. Most often the oven latch assembly has failed and needs replacement.

• GE Range FD Error Code - Causes & Fix

  31 May, 2026

  FD means shorted meat probe circuit. Unplug the probe and clear the code. If it stays off, replace the meat probe assembly.

• GE Range F7 Error Code - Causes & Fix

  31 May, 2026

  F7 on a GE range means a keypad or control-interface fault. The keypad assembly or control board is usually the fix.

• GE Range F97 Error Code - Causes & Fix

  31 May, 2026

  F97 means an internal component has failed, typically the lower cooling fan or its circuit. Most repairs need the fan replaced.

• GE Range F96 Error Code - Causes & Fix

  31 May, 2026

  F96 means the upper oven cooling fan speed is too low. Usually caused by a failed fan motor, bad sensor, or wiring issue.

• GE Range F9 Error Code - Causes & Fix

  31 May, 2026

  F9 on a GE range means door latch fault. Most common fix: clean the latch path of grease and debris, then reset power.

• GE Range F8 Error Code - Causes & Fix

  31 May, 2026

  F8 on a GE range usually means a control board fault or door latch problem. Most often fixed by replacing the main control board.

• GE Range F6 Error Code - Causes & Fix

  31 May, 2026

  F6 on a GE range means a keypanel problem. The keypad assembly usually needs replacement. Learn how to diagnose and fix it.

• GE Range F7 Error Code - Causes & Fix

  31 May, 2026

  F7 on a GE range means a stuck or shorted keypad button. Clean the ribbon cable contacts or replace the membrane keypad to fix it.

• GE Range F4 Error Code - Causes & Fix

  31 May, 2026

  F4 means shorted or low-resistance oven sensor. Most common fix: replace the oven temperature sensor after testing resistance at 1100 Ω.

• GE Range F3 Error Code - Causes & Fix

  31 May, 2026

  F3 means the oven sensor circuit is out of range. The most common fix is replacing the oven temperature sensor probe.

• GE Range F20 Error Code - Causes & Fix

  31 May, 2026

  F20 means your GE oven detected an over-temperature condition. Most common fix: replace the oven temperature sensor or control board.

• GE Range F2 Error Code - Causes & Fix

  31 May, 2026

  F2 on a GE range means the oven overheated beyond a preset limit. The most common fix is replacing the oven temperature sensor.

• GE Range F0 Error Code - Causes & Fix

  31 May, 2026

  F0 on a GE range means a stuck or failed keypad. The most common fix is to replace the touchpad or control board.

• GE Oven F7 Error Code - Causes & Fix

  31 May, 2026

  F7 on GE ovens signals a keypad or key panel fault. Most often fixed by cleaning the ribbon connector or replacing the keypad.

• GE Oven F97 Error Code - Causes & Fix

  31 May, 2026

  F97 means an internal component failed, usually the lower cooling fan or its sensor. Most techs replace the fan assembly first.

• GE Oven FF Error Code - Causes & Fix

  31 May, 2026

  FF means invalid temperature reading from the sensor circuit. Most often fixed by replacing the oven temperature sensor or its harness.

• GE Oven F8 Error Code - Causes & Fix

  31 May, 2026

  F8 means your GE oven control board is failing or not getting proper voltage. The most common fix is replacing the main control board.