Posts

All the articles I've posted.

• KitchenAid Range F4 Error Code - Causes & Fix

  8 Jun, 2026

  F4 on a KitchenAid range signals a control or wiring fault. Power-cycle the breaker for 1 minute. If it returns, replace the control board.

• KitchenAid Range F3 Error Code - Causes & Fix

  8 Jun, 2026

  F3 means an oven temperature sensor circuit problem. The most common fix is replacing the failed oven temperature sensor probe.

• KitchenAid Range F1 Error Code - Causes & Fix

  8 Jun, 2026

  F1 signals a control or wiring fault. Reset power at the breaker for 1 minute. If it returns, the control board usually needs replacement.

• KitchenAid Range F2 Error Code - Causes & Fix

  8 Jun, 2026

  F2 means oven sensor, control, or wiring fault. Most likely a failed sensor. Reset power first, then check sensor resistance.

• KitchenAid F0 Error Code - Causes & Fix

  8 Jun, 2026

  F0 E0 on KitchenAid ovens means the control cannot identify the fault. Most often it's a failed electronic control board.

• Kenmore Er 1F Error Code - Causes & Fix

  8 Jun, 2026

  Er 1F means ice compartment fan failure. Frost jamming the fan blades is the most common cause. Unplug, defrost, and check the fan.

• Kenmore Range F04 Error Code - Causes & Fix

  8 Jun, 2026

  F04 signals a problem with the Electronic Oven Control or its wiring. Most often a control board glitch; power reset fixes many cases.

• Kenmore Range F031 Error Code - Causes & Fix

  8 Jun, 2026

  F031 on a Kenmore range means an oven temperature sensor circuit fault. The most common fix is replacing the RTD sensor probe.

• Kenmore F030 Error Code - Causes & Fix

  8 Jun, 2026

  F30 on a Kenmore range means the oven temperature sensor circuit has failed. Most often a loose connector or bad RTD sensor probe.

• Kenmore Range F03 Error Code - Causes & Fix

  8 Jun, 2026

  F03 means the oven temperature sensor circuit has failed. The most common fix is replacing the oven temperature sensor probe.

• Kenmore F10 Error Code - Causes & Fix

  8 Jun, 2026

  F10 means runaway oven temperature detected. Most often a failed oven temperature sensor (probe), wiring issue, or stuck relay in control.

• GE Refrigerator tC Error Code - Causes & Fix

  8 Jun, 2026

  tC on a GE refrigerator means TurboCool mode is active, not a fault. Press and hold the Fridge temperature button for 3 seconds to cancel.

• GE Refrigerator tF Code - Causes & Fix

  8 Jun, 2026

  tF on a GE fridge is not an error. It means TurboFreeze mode is active. Press and hold the Freezer pad for 3 seconds to turn it off.

• GE Refrigerator PF Error Code - Causes & Fix

  8 Jun, 2026

  PF means power failure or power interruption was detected. Most likely fix: check that the plug is fully seated and the breaker is on.

• GE Refrigerator H2O Error Code - Causes & Fix

  8 Jun, 2026

  H2O on a GE refrigerator means the water filter needs replacement. Replace the filter and reset the indicator to clear the reminder.

• GE dS Error Code - Causes & Fix

  8 Jun, 2026

  dS = Door Switch Error. The control thinks a door is open. Most often a stuck or failed door switch plunger. Reset power, check closure.

• GE Refrigerator dE Error Code - Causes & Fix

  8 Jun, 2026

  dE means your defrost system failed in the last 24 hours. Most likely fix: replace the open defrost heater or defrost thermostat.

• GE Refrigerator CI Error Code - Causes & Fix

  8 Jun, 2026

  CI means icemaker communication error. The icemaker module or harness has failed or disconnected. Reset power and check connections first.

• GE Refrigerator CF Error Code - Causes & Fix

  8 Jun, 2026

  GE does not publish CF as an official refrigerator code. The display is likely misread CC, FF, or PF. Power-cycle the unit and check your manual.

• GE Range FD Error Code - Causes & Fix

  8 Jun, 2026

  FD means a shorted meat probe circuit. Most often the probe itself has failed. Unplug the probe and see if the code clears.

• GE Range F97 Error Code - Causes & Fix

  8 Jun, 2026

  F97 on a GE range or wall oven means an internal component needs replacement. On double ovens, the lower cooling fan is the most common fix.

• GE Range F96 Error Code - Causes & Fix

  8 Jun, 2026

  F96 on a GE range means the upper oven cooling fan speed is not detected. The most common fix is replacing the blower motor assembly.

• GE Oven F350 Error Code - Causes & Fix

  8 Jun, 2026

  F350 means the upper cooling fan blower wheel is not spinning fast enough. Most often caused by debris blocking the fan path.

• GE Dryer E63 Error Code - Causes & Fix

  8 Jun, 2026

  E63 is not a standard GE code. Check your model's tech sheet. If it appears, most likely a heating element or control board fault.