Posts

All the articles I've posted.

• Frigidaire Dishwasher PF Error Code - Causes & Fix

  8 Jun, 2026

  PF means power failure. Press START/CANCEL to clear the code after an outage or breaker trip, then restart the cycle.

• Frigidaire Dishwasher LOC Code - Causes & Fix

  8 Jun, 2026

  LOC means the control lock (child lock) is active. Hold the Control Lock button for 3 seconds to unlock the panel and clear the code.

• Frigidaire Dishwasher LO Error Code - Causes & Fix

  8 Jun, 2026

  LO means low or empty rinse aid in the dispenser. Refill the rinse aid reservoir and close the cap securely to clear the code.

• Frigidaire i40 Error Code - Causes & Fix

  8 Jun, 2026

  i40 means clogged filter or sump on Frigidaire dishwashers. Clean the filter assembly and sump area at the tub bottom to restore drain flow.

• Frigidaire i20 Error Code - Causes & Fix

  8 Jun, 2026

  i20 means the dishwasher did not drain properly. Most often a blocked drain hose, clogged filter, or missing disposer knockout plug.

• Maytag Washer LOC Error Code - Causes & Fix

  8 Jun, 2026

  LOC means Control Lock is active, not a failure. Press and hold the Control Lock button until the display clears. If stuck, power reset.

• Maytag LdU Error Code - Causes & Fix

  8 Jun, 2026

  LdU means the lid cannot unlock. Remove laundry baskets or items from the top of the lid and make sure the lid area is free to move.

• Maytag LdL Error Code - Causes & Fix

  8 Jun, 2026

  LdL means the lid lock will not lock or has failed. Most often an item under the lid or detergent buildup blocks the lock mechanism.

• Maytag Washer LC Error Code - Causes & Fix

  8 Jun, 2026

  LC/LOC means Control Lock is active on your Maytag washer. Press and hold the Control Lock button for 3-5 seconds to unlock the panel.

• Maytag HC Error Code - Causes & Fix

  8 Jun, 2026

  HC means hot and cold inlet hoses are reversed. Switch the hoses at the back of the washer so each connects to the correct inlet.

• Maytag F8E2 Error Code - Causes & Fix

  8 Jun, 2026

  F8E2 means bulk dispenser fault on Maytag top-load washers. Most often the dispenser is empty, not seated, or clogged. Refill and reseat it.

• Maytag F8 E2 Error Code - Causes & Fix

  8 Jun, 2026

  F8 E2 means a dispenser system fault on Maytag front-load washers. Clean the detergent drawer and cartridge of buildup to fix it.

• GE Dishwasher FFF Error Code - Causes & Fix

  8 Jun, 2026

  FFF is not a documented GE dishwasher code. Likely misread or user-reported. Check for FTD (drain fault) or consult your model's manual.

• Whirlpool Dishwasher F3E1 Error - Causes & Fix

  8 Jun, 2026

  F3E1 signals a water-sensing fault (thermistor or optical water indicator). Most often a failed sensor or loose harness. DIY fix possible.

• Maytag Washer F7E5 Error Code - Causes & Fix

  8 Jun, 2026

  F7E5 means the control detects a shifter or drive engagement fault. Most often a failed shift actuator. Power reset first.

• Maytag Washer F7E1 Error Code - Causes & Fix

  8 Jun, 2026

  F7E1 means the motor cannot reach the correct speed. Most often caused by shipping bolts left in or a failed shift actuator.

• Maytag F73 Error Code - Causes & Fix

  8 Jun, 2026

  F73 means the main control board lost communication with the front panel. Most often a loose connector or failed interface board.

• Maytag Washer F71 Error Code - Causes & Fix

  8 Jun, 2026

  F71 on Maytag washers signals a drive or motor control communication fault. Check wiring harnesses and connectors between boards first.

• Maytag Washer F70 Error Code - Causes & Fix

  8 Jun, 2026

  F70 means the main control board and user interface can't talk to each other. Most often a loose harness or failed control board.

• Maytag F34 Error Code - Causes & Fix

  8 Jun, 2026

  F34 on a Maytag front-load washer means items were detected during the Clean Washer cycle. Remove all laundry from the drum and restart.

• Maytag Washer F30 Error Code - Causes & Fix

  8 Jun, 2026

  F30 means dispenser system error on Maytag washers. Most often a jammed drawer or failed dispenser motor. Clean drawer, check linkage.

• Maytag Washer F24 Error Code - Causes & Fix

  8 Jun, 2026

  F24 means water temperature sensor fault. Most likely cause: failed thermistor. Check wiring connections and test or replace the sensor.

• Maytag Washer F11 Error Code - Causes & Fix

  8 Jun, 2026

  F11 means a serial communication fault between the main control board and motor control board. Most often fixed by replacing the MCU.

• Maytag F07 Error Code - Causes & Fix

  8 Jun, 2026

  F07 on Maytag dryers signals a drive motor or drum rotation fault. Most often the drive belt has broken or slipped off the drum pulley.