Posts

All the articles I've posted.

• Kenmore Oven F0 Error Code - Causes & Fix

  10 Jun, 2026

  F0 means a keypad or control-board fault. Most common fix: power reset, then replace the touchpad if it tests shorted or the control if it doesn't.

• Kenmore Microwave SE Error Code - Causes & Fix

  10 Jun, 2026

  SE means a keypad short or stuck key. Most often fixed by cleaning the touchpad or replacing the membrane keypad assembly.

• Kenmore Microwave PF Error Code - Causes & Fix

  10 Jun, 2026

  PF means power failure or interruption. Press Clear/Stop/Off to dismiss the code, then check your outlet and breaker for loose or tripped connections.

• Kenmore Microwave F9 Error Code - Causes & Fix

  10 Jun, 2026

  F9 on a Kenmore microwave means inverter failure. The most common fix is replacing the inverter board after checking door switches.

• Kenmore Microwave F5 Error Code - Causes & Fix

  10 Jun, 2026

  F5 means a door switch or door interlock failure. The most common fix is replacing the failed door switch after testing for continuity.

• Kenmore Microwave F4 Error - Causes & Fix

  10 Jun, 2026

  F4 means humidity sensor open or sensing error. Most likely fix: replace the humidity sensor or repair its wiring harness.

• Kenmore Microwave F3 Error Code - Causes & Fix

  10 Jun, 2026

  F3 means shorted keypad or thermistor fault depending on model. Most common fix: replace membrane keypad or temperature sensor.

• Kenmore Microwave F2 Error Code - Causes & Fix

  10 Jun, 2026

  F2 on a Kenmore microwave means keypad or user interface fault. Most often fixed by power reset or replacing the keypad assembly.

• Kenmore Microwave E2 Error Code - Causes & Fix

  10 Jun, 2026

  E2 on a Kenmore microwave signals a thermistor (temperature sensor) circuit fault. Most often the thermistor itself has failed.

• Kenmore Microwave E11 Error - Causes & Fix

  10 Jun, 2026

  E11 means humidity sensor fault. Most often a failed sensor or loose connector. Check wiring first, then replace the sensor.

• Kenmore Microwave E1 Error Code - Causes & Fix

  10 Jun, 2026

  E1 on a Kenmore microwave means a thermistor error. The most common fix is replacing the thermistor sensor or checking its wiring.

• Kenmore Dryer PF Error Code - Causes & Fix

  10 Jun, 2026

  PF means power failure: the dryer detected a power interruption. Press and hold START to resume, or clear by pressing POWER.

• Kenmore Dryer F73 Error Code - Causes & Fix

  10 Jun, 2026

  F73 is not a documented Kenmore dryer code. If you see F70, it means a communication failure between control boards. Check harness first.

• Kenmore Dryer F71 Error Code - Causes & Fix

  10 Jun, 2026

  F71 means a control board communication fault. The most common fix is reseating or replacing loose wiring harnesses between boards.

• Kenmore Dryer F31 Error Code - Causes & Fix

  10 Jun, 2026

  F31 means low or missing L2 line voltage (240V supply fault). Most often caused by a tripped breaker. Reset both dryer breakers first.

• Kenmore Dryer F30 Error Code - Causes & Fix

  10 Jun, 2026

  F30 on Kenmore dryers means restricted airflow. Clean the lint screen and check for kinked or clogged vent hose from dryer to outside.

• Kenmore Dryer F29 Error Code - Causes & Fix

  10 Jun, 2026

  F29 means a moisture sensor circuit fault. The most common fix is cleaning residue off the sensor bars near the lint screen.

• Kenmore Dryer F26 Error Code - Causes & Fix

  10 Jun, 2026

  F26 means the door switch circuit is open. The dryer won't start. Most likely cause: failed door switch or misaligned door latch.

• Kenmore Dryer F23 Error Code - Causes & Fix

  10 Jun, 2026

  F23 means an outlet/exhaust thermistor fault. Most often the exhaust thermistor itself has failed and needs replacement.

• Kenmore Dryer F22 Error Code - Causes & Fix

  10 Jun, 2026

  F22 means the outlet thermistor circuit is open or shorted. Replace the outlet thermal sensor (about 10 kΩ at room temp) or repair its wiring.

• Kenmore Dryer F01 Error Code - Causes & Fix

  10 Jun, 2026

  F01 means the electronic control board has failed. Most common fix: replace the main control board after a power-cycle reset attempt.

• Kenmore Dishwasher F8E2 Error - Causes & Fix

  10 Jun, 2026

  F8E2 means the dispenser/diverter mechanism is stuck or not reporting position correctly. Most often a failed diverter motor.

• KitchenAid Dishwasher F6E2 Error Code - Causes & Fix

  10 Jun, 2026

  F6E2 on a KitchenAid dishwasher signals a control or wiring fault. Power-reset the machine first; if it returns, inspect connectors.

• KitchenAid Oven F6 E2 - Causes & Fix

  10 Jun, 2026

  F6 E2 means a fault in the Appliance Manager Control, Converter Control, or wiring. Reset power for 1 minute and check connectors.