🍳Ranges & Ovens Error Codes
Range, oven and cooktop error codes for electric and gas models. Temperature-sensor faults, control (ERC) errors, igniter and relay codes, and the parts that fix them across Samsung, LG, Whirlpool, GE, Frigidaire and KitchenAid. Gas work is flagged pro-recommended.
66 guides · Top brands: Samsung, Lg, Whirlpool, Ge, Frigidaire, Kitchenaid
Section editor: Error Code Fixes Editorial Team ·
Recent Ranges & Ovens Guides
-
Rational SelfCookingCenter Service Codes: SCC WE, Legacy SCC and iCombi Reference (Service 10-121, Sub-Codes, Gas Lockout)
Rational combi service codes taken from the four OEM service references: legacy SCC 2004-2011, SCC whitefficiency, iCombi Pro and iCombi Classic. Service 10-14 water faults, the Service 20.x thermocouple sub-codes, CleanJet Service 25, the Service 28/29 temperature limits most lists get wrong, and the gas Service 140 lockout.
-
Rational Service 140.4 and 140.8: The Gas Lockout Codes That Block Your Combi Oven From Cooking (SCC, iCombi Pro, iCombi Classic)
Service 140.4 warns of repeated gas combustion faults on Rational combi ovens; a third trigger within 72 hours produces Service 140.8 and blocks cooking. The official trigger criteria from TI_2220, the critical gas errors behind it (17/18/22/37/38/42), and the per-series service-menu reset paths.
-
Rational Service 25 Error: CleanJet Water Circulation Fault on SCC and iCombi (Causes and Step-by-Step Fix)
Service 25 on a Rational combi means the CleanJet water circulation check failed: the oven saw no water flow, or the jet never loaded the fan wheel. The OEM check list is water supply, pressure, rack position, hoses, pump and CDS sensor, in that order.
-
Kenmore Oven F9 Error Code - Causes & Fix
F9 means door-lock fault during self-clean. Most often a failed door latch assembly. Inspect the lock, reset power, or replace latch.
-
Maytag Oven Lock Error Code - Causes & Fix
LOC or Locked means Control Lock is active, not a fault. Hold START/ENTER for 5 seconds to unlock. If it doesn't clear, power reset.
-
Samsung Oven E-08 Error Code - Causes & Fix
E-08 means the oven is not heating or the control detects a heating-system failure. Most common cause: failed bake element or sensor.
-
Kenmore Oven Display Not Working - Causes & Fix
A dead display usually means the main control board isn't sending power to the display board. Check incoming power first, then replace the main control board if needed.
-
Kenmore Oven Self-Clean Not Working - Causes & Fix
Usually a failed door lock assembly that won't latch or report locked status. Check that the door closes fully, then test the lock motor and switch.
-
Kenmore Oven Door Won't Lock - Causes & Fix
A failed door lock motor or control board is usually why a Kenmore oven door won't lock. Replace the lock assembly or main control.
-
Kenmore Oven Igniter Not Working - Causes & Fix
A weak hot-surface igniter that glows but doesn't draw enough current to open the gas valve is the most common cause. Replace the igniter.
-
Kenmore Oven Broiler Not Working - Causes & Fix
Most often a burned-out broil element. Check the element for visible breaks or blistering, then test for continuity and replace if open.
-
Kenmore Oven Temperature Not Accurate - Causes & Fix
A Kenmore oven running too hot or cold is usually caused by a miscalibrated control or a failed temperature sensor. Test with an oven thermometer and recalibrate through the control panel, or replace the sensor if it reads far from 1,080 ohms at room temperature.
Showing 12 of 66 ranges & ovens guides. Browse all guides →