🍽️Dishwashers Error Codes
Dishwasher error codes and fault diagnostics. Drain and fill faults, heating errors, leak detection and control-board codes, plus the OEM parts that resolve them. Coverage across Bosch, Samsung, LG, Whirlpool, KitchenAid and GE.
39 guides · Top brands: Bosch, Samsung, Lg, Whirlpool, Kitchenaid, Ge
Section editor: Error Code Fixes Editorial Team ·
Recent Dishwashers Guides
-
Bosch Dishwasher E25 Error - Causes & Fix
E25 means a drain pump blockage or flow problem. Most common fix: clean the filter, sump, and pump cover, then reseat the cover firmly.
-
Whirlpool Dishwasher E6 Error Code - Causes & Fix
E6 means water supply fault or tap closed. Most often caused by a closed shutoff valve, kinked inlet hose, or clogged inlet screen.
-
Kenmore Dishwasher Buttons Not Working - Causes & Fix
A failed touchpad membrane is the most common cause when buttons won't respond. Replace the control panel assembly after checking for control lock and power cycling the unit.
-
Kenmore Dishwasher Stuck Mid Cycle - Causes & Fix
Usually a door latch or door switch failure. Check latch engagement and alignment first, then test inlet valve and drain system.
-
Maytag Dishwasher Buttons Not Working - Causes & Fix
Control lock is usually on or the door is not latched. Disable the lock or close the door fully and retest the buttons.
-
Maytag Dishwasher Won't Fill with Water - Causes & Fix
Usually caused by a closed supply valve or stuck overfill float. Check that the water supply is open and the float moves freely.
-
Maytag Dishwasher Leaking - Causes & Fix
Most leaks come from a worn or dirty door gasket. Clean the seal and door frame, check for damage, and replace if torn or loose.
-
Frigidaire Dishwasher Buttons Not Working - Causes & Fix
Corroded ribbon cable contacts are the most common cause. Remove the door panel, disconnect the cable, and clean the copper leads with a pencil eraser.
-
GE Dishwasher Buttons Not Working - Causes & Fix
Usually caused by a failed touchpad or user interface. The display lights work but buttons don't register presses due to worn contacts.
-
KitchenAid Dishwasher Buttons Not Working - Causes & Fix
Usually Control Lock is enabled or the touchpad is wet. Disable Control Lock, dry the panel, power-cycle, then test the door latch and UI.
-
Whirlpool Dishwasher Buttons Not Working - Causes & Fix
Control Lock is usually the culprit. Disable it per your model's instructions, check the door latch, then reset the control.
-
LG Dishwasher Buttons Not Working - Causes & Fix
Usually caused by Control Lock enabled (CL on display). Disable by holding Half Load + Energy Saver for 3 seconds on most models.
Showing 12 of 39 dishwashers guides. Browse all guides →